Double shaft paddle mixer machine / animal feed mixer for powder
mixing
It was used for animal feed production line,it can mixer different
material one time.the mixing speed is fast, and the mixing cycle is
short,the mixing time is 6-120 second/batch,CV less than or equal
to 5%,small power consumption.This is double shaft paddle mixer
machine,so the raw material is stirred more evenly.And the machine
you can add solid material also can add the liquid material. And we
also have single shaft mixer machine.
And our machine can make carbon steel and stainless steel,when you
inquiry,plase let me know this.
Double shaft paddle mixer was used for animal feed processing
factory,animal farm to work, it will improve the working
efficiency,and save labor. It work with hammer mill,pellet
machine,cooler,Rotary classification sieve,packing machine,etc.
that is the line, can make high quality chicken feed, pig
feed,cattle feed,goat feed ,etc.
Technical data:
| MODEL | AIXJ0.5 | AIXJ1 | AIXJ2 | AIXJ4 | AIXJ7 |
| YIELD(t/b) | 0.25 | 0.5 | 1 | 2 | 3 |
| POWER(KW) | 5.5 | 11 | 18.5 | 30 | 45 |
| CV (c v %) | <=5 |
Features:
1. Fast mixed,unloaded at the end of open-nesting,the low rate of
residual material.
2. The machine can make two liquid adding system to meet the
customer want to add the liquid requirement.
3. Access door with limit switch can ensure worker safe
4. Flexible body to open the door,good sealing,to ensure that no
leakage of material.
5. The smooth running,without damaging the original characteristic
of material.
6. Use large variation range of full load, with short time of
mixing and discharging and very little residue.
7. Special material design,the opening angle is big, the discharge
is quick,the residue is small.
8. Quick-opening maintenance door for easy to clean, safe for
operator.
9. Up and down connection rod with bigger discharging angel,without
residue.
10. Double row chain to ensure the stability of the power
transmission and high efficiency.
11. Biaxial rotor to paddle,paddle install with the main shaft is
40 angle,not only the radial and axial movement of material.
